Core duties and responsibilities

• Perform Inspection and troubleshooting activities at site locations to diagnose problems, determine appropriate resolution, and implements corrective action working along with the Team of Service Engineers and technicians.
• Service and Maintenance of ZF propulsion control system (Thrusters and Gearboxes) for customers worldwide according to the requirements. ZF Hiring Job Vacancy-2024
•  Submission of technical reports accordance with ZF guidelines and Standards followed.
•  Perform installation, Pre-commissioning and commissioning activities at customer site locations. Must be capable of working unsupervised and leading small teams.
• Under the direction of Service Manager, perform a wide range of engineering tasks to ensure the technical integrity and proper installation and commissioning of ZF Marine propulsion system and its controls.
• Develop presentations and provide training and instruction to customers on system operations.
• Promote sales of maintenance services and spare parts.
• Perform other related engineering tasks to facilitate proper commissioning and customer satisfaction
• Provide continuous, 24 hour by 7 day a week, support in response to customer calls for service
• Ensure appropriate response and service is provided to customer.

Your Tasks:  

• Qualify features of system under test based on a clear understanding of the system, its requirements and potential vehicle use case scenarios  
• Increase efficiency by automation and front loading of tests  
• Improve robustness of testing by incorporating lessons learnt from previous projects, by analysing defects leaked , stress tests and so on  
• Comply to process and deliver as per plan, communicate deviations and mitigation plans,support analysis of problem reports  
• Actively increase simulation based testing by identifying model/HW changes needed and interface with the model team for implementation  

Your Profile: 

• Bachelors / Masters degree in Electrical / Electronics/Mechanical/Control systems   
• 3 to 5 years of automotive system testing experience using Hardware-In-Loop(HIL) setups.    
• Experience in automotive communication protocols and Diagnostics and associated tools  
• Experience in using modern Requirement , test management and problem reporting tools  
• Experience in test automation and related scripting and tools is a plus 

• Your tasks as Project Quality Engineer (m/f/d):

• Be Quality navigator of project team with guidance for standards and roadmaps, advocate of the customer in projects (4-eye principle) and trusted quality assurance partner for the project team and for the customer
• Ensure safe product launch, both for process and product robustness. This includes taking care of all customers related quality topics, consolidating the different aspects in the project, managing the risk during all project phases, as well as ensuring a quality mindset in the Project execution and R&D teams.
• Drive and manage Quality Planning for new products acc. to GDPEP and CVS-PEP (focus HW Design) process in order to achieve Safe Launch, Quality KPIs Targets and Customer Satisfaction.
• Drive and manage Project Quality Strategy and the Supporting Quality Team (SQT).

• Your profile as Project Quality Engineer (m/f/d):

• Several years of professional experience with Customer or Supplier Quality management, ideally experience with Project Quality management.
• Knowledge of standards IATF 16949,
• Experience with quality core tools (APQP, FMEA, MSA, SPC, PPAP)
• Experience with quality methods and technics (8D, Control Plan, 5 Why, Ishikawa,  ..)
• Excellent analytical and decision-making skills
• Advanced product and production knowledge
• Self-confident team player with a target-driven and agile mindset,
• Bachelor`s or Master`s degree in Mechanics, Quality Management, Project management or similar

Your Tasks

• Design and development of test facilities used in product validation
• Develop Data Acquisition and data analysis tools
• Design, development, and documentation of electrical& electronic control panel
• Maintain test rigs and the test facilities including environmental test chambers, vibration shakers etc
• Build time and cost plan for new test facility development and need to complete commissioning reports for new facilities.
• Knowledgeable in MSA methods for proving test rigs for R&R.
• Documentation for the calibration of instruments as per IATF standards

Your Profile

• Overall experience in test facilities maintenance: 5 years minimum.
• Minimum 2 years of experience in PLC/LabVIEW programming
• Minimum 2 years of experience in maintenance of test rigs
• Handle external suppliers for the smooth operation of testing laboratory
• Instruct supporting personnel (e.g. Mechanics)

Your Task:

• Responsible for supplier concern management (issuing and monitor supplier quality non – conformities found at incoming inspection and/or other areas such as production floor)
• Drive compliance of no-conformance process for the supplier material (e.g: Product identification, quarantine, product not mixed, supplier returns, scrap, etc.)
• Monitor compliance of product traceability requirements for supplier.
• Lead incoming inspection tasks (incoming inspection of material, definition of inspection instructions, definition of characteristics to be verified, focus on special characteristics, identification of material status, approved/rejected-, quarantine of suspect/reject material, etc.)

Your profile:

1. Experience in Automobile Instruries with minimum 10 years experience 
2. Experience in Supplier Quality, Handling of OEM Customers
3. High skill on Problem solving Technical problems and Implement, monitoring’s of PCA
4. Team collaboration and Value addition to the Functions KPI
5.Deep understanding of Operations and Quality.
6.Robust global network with divisional, Regional and Functional Heads.

• Check customer, legal and system requirements or defined requirements from internal stake holders, identify gaps and transfer into mechatronic hardware development requirements by requirements management system
• Design of mechatronic components in Creo environment
• Develop product concepts considering design rules and global division CVS standards and comparatively rate different concepts (own, competitors, suppliers)
• Develop mechatronic circuit modules and own overall quality of the hardware
• Realization of complex system requirements to provide robust and reliable hardware solutions
• Collaboration with other team members (including both system, hardware, software & mechanical engineers) to agree system designs, interfaces and protocols etc.
• Selection and qualification of new packaging for mechatronic components, interconnection
  technologies and materials in alignment with central engineering

Qualification & experience:

Degree in Mechatronics Engineering preferably post graduate

3 to 7 years of experience in Product Engineering preferably in the automotive industry

Your Task:

• Independent assessment of the project Quality status and create transparency
• Execute all activities related to project quality function and lead the Quality project team to achieve Safe Launch
• Apply Quality Assurance in all project routines and ensures compliance to GDPEP across all project phases
• Lead Total Quality Management approach in all activities of the Project Team with adherence to Advanced Product Quality Planning (APQP);
• Providing functional excellence for problem resolution/ RCA for non-conformities and critical issues impacting the customer or putting the project at risk;
• Execute reality checks on fulfilment of customer requirements and perform quality communication with the customer
• Track systematic problem-solving approach is applied in projects, drive it to closure and implement Lessons Learned

Your Profile:

• Strong Project Management/ Project Quality experience
• Be able to drive strong customer focus
• Strong problem solving and continuous improvement skills
• Excellent analytical and decision-making skills
• Advanced product and production knowledge
• Strong communication and influence skills within the global organization
• Conflict management skills/ drive positive frictions with key stakeholders

Your Tasks:

• Oversee validation and payment of Direct Taxes (TDS, TCS, Advance Tax, MAT).
• Ensure accurate GST calculations, reconciliation, and timely payments.
• Manage comprehensive documentation for tax assessments and future reference.
• File Annual Income Tax, Form 3CACD, and handle monthly, quarterly, and annual GST returns.
• Coordinate with auditors for Direct and Indirect Tax Audits, responding promptly to queries.

Your Profile:

• Chartered Accountant (Inter/semi qualified), B.Com./M.Com, MBA.
• 3 to 7 years of experience in multinational organizations, handling taxation activities.
• In depth knowledge of Direct and Indirect Tax Laws.
• Proficient in MS Excel, ERP (NAV/SAP).
• Effective stakeholder management with Statutory Auditors, Internal Auditors, Tax Consultants, Tax Authorities, Cross functional teams, Regional Tax Head, Group Tax Department, and Global ZF Group Companies.